TabsSummary Dr. Sajid Ali has received Ph.D. degree in mechanical engineering from King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, in 2018. He is currently working as an Assistant Professor in Mechanical and Energy Engineering Department, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia. He has published more than 30 peer reviewed journal and conference publications. His research interests include renewable energy, structural dynamics, vibration, finite element modelling, and roll-to-roll manufacturing. Publications Journal Publications Sajid Ali. “Nonlinear dynamic and stability of a small size moving beam under thermal conditions”, Mathematical Methods in the Applied Sciences, 2023. Maher Al-Turk, Sajid Ali and M. A. Hawwa. “Characterization of a dual nonlinear Helmholtz Resonator”, Micromachines, 2022. Sajid Ali, M. A. Hawwa and D. E. Hardt. “Dynamic behavior of axially moving web in multi-span roll-to-roll microcontact printing system”, Journal of Systems and Control Engineering, 2022. Sajid Ali, and M. A. Hawwa. “Dynamics of axially moving beams: a finite difference approach”, Ain Shams Engineering Journal, 2022. Sajid Ali, M. A. Hawwa, and Uthman Baroudi. “Effect of leak geometry on water characteristics inside pipes”, Sustainability, 2022. Sajid Ali, Fahad Al-Amri, and Farooq Saeed. “Numerical and experimental performance evaluation of a photovoltaic thermal integrated membrane desalination system”, Energies, 2022. Mamon Horoub, Sajid Ali, et al. “Study the effect of changing cables’ pattern on the workspace of a six DOF floating parallel marine robot (FPMR)”, Alexandria Engineering Journal, 2022. M. A. Hawwa, Sajid Ali, et al. “Transmission loss as an indicator on multiple leaks in a pipeline”, Journal of Pipeline Systems Engineering and Practice, 2022. N. G. Hariri, Sajid Ali, et al. “Experimental investigation of azimuth and sensor-based control strategies for a PV solar tracking application”, Applied Sciences, 2022. Kaffayatullah Khan, Sajid Ali, et al. “A hybrid SVR-based prediction model for the interfacial bond strength of externally bonded FRP laminates on grooves with concrete prisms”, Polymers, 2022. K. A. M. Alharbi, Sajid Ali, et al. “Cattaneo–Christov heat flow model for copper–water nanofluid heat transfer under Marangoni convection and slip conditions”, Scientific Reports, 2022. Sajid Ali et al. “Transverse response of an axially moving beam with intermediate viscoelastic support”, Mathematical Problems in Engineering, 2021. Fahad Al-Amri, Sajid Ali, et al. “Innovative technique for achieving uniform temperatures across solar panels using heat pipes and liquid immersion cooling in the harsh climate in the kingdom of Saudi Arabia”, Alexandria Engineering Journal, 2021. Umar Nawaz Bhatti, and Sajid Ali. “Design and Optimization Of 6-Dof Platform Top Plate Under Realistic Joint Conditions”, International Journal of Simulation Modelling, 2020. Sajid Ali, and M. A. Hawwa. “A parametric study on the dynamics of two-span roll-to-roll microcontact printing system”, Sādhanā – Academy Proceedings in Engineering Sciences, 2019. M. A. Hawwa, Sajid Ali and D. E. Hardt. “Influence of roll-to-roll system’s dynamics on axially moving web vibration”, Journal of Vibroengineering, 2019. Sajid Ali, M. A. Hawwa and D. E. Hardt. “Vibration Suppression of An Axially Moving Web in A Multi-Span Roll-to-Roll Microcontact Printing System”, Journal of Vibration Engineering & Technologies, 2018. Sajid Ali et al. “Effect of Baffle Size and Orientation on Lateral Sloshing of Partially Filled Containers: A Numerical Study”, European Journal of Computational Mechanics, 2017. Sikandar Khan, Sajid Ali, et al. “Observation of the Starting and Low Speed Behaviour of Small Horizontal Axis Wind Turbine”, Hindawi Publishing Corporation, Journal of Wind Energy, 2014. Sajid Ali et al. ‘’Effect of Fluid Physical Properties on Rollover Stability in terms of Damping of Dynamic Forces & Moments in Fluid Sloshing”, International Journal of Advanced Research in Engineering and Technology, 2013. Conference Publications Nauman Ahmed, Sikandar Khan, Sajid Ali, et al. “A comparative study among swarming intelligence algorithms and subspace-based algorithms for high resolution direction of arrival estimation", 8th International Conference on Engineering and Emerging Technologies (ICEET), 2022. Fawad S. Khan, Athar Waseem, Sajid Ali, et al. “Federated learning-based UAVs for the diagnosis of plant diseases", 8thInternational Conference on Engineering and Emerging Technologies (ICEET), 2022. Muhammad Umar Siddiqui, Sajid Ali, et al. “Optimum tilt angles of solar collectors in Saudi Arabia”, 3rd International Conference on Electrical, Communication and Computer Engineering (IEEE), 2021. Sajid Ali et al. “Effect of Baffles Location on the Rollover Stability of Partially Filled Road Container”, 2nd International Conference on Electrical, Communication and Computer Engineering (IEEE), 2020. Sikandar Khan, Sajid Ali, et al. “Dynamic modeling and analysis of a four-bar mechanism for automobile applications”, 2nd International Conference on Electrical, Communication and Computer Engineering (IEEE), 2020. Rizwan Ahmad, Sajid Ali, et al. “Simulation and breakdown characteristics of china clay and silica sand for improved grounding system”, 2nd International Conference on Electrical, Communication and Computer Engineering (IEEE), 2020. Sikandar Khan et al, Sajid Ali. “Optimization of Vehicle Suspension System Using Genetic Algorithm”, The 10th International Conference on Mechanical and Aerospace Engineering (IEEE), 2019. Ahmad Albalasie, Sajid Ali et al. “Design, Prototype, and Control Design Based on Computed Torque Control of Selective Compliance Assembly Robot Arm”, The 9th International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (IEEE), 2019. Mamon Horoub, Sikandar Khan and Sajid Ali. “Comparative Analysis of a Floating mooring line-Driven Platform (FMDP) Having Different Mooring Lines Patterns”, The 9th International Conference on Mechanical and Aerospace Engineering (ICMAE), 2018. Umar Nawaz Bhatti, Sajid Ali et al. “A numerical modeling study of the effects of various joint boundary conditions on stiffness behavior of 6-DOF platform’s top plate”, The 9th International Conference on Mechanical and Aerospace Engineering (ICMAE), 2018. Qualifications Ph.D. Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, 2018. M.Sc. Mechanical Engineering, University of Engineering & Technology (UET), Peshawar, Pakistan, 2013. B.Sc. Mechanical Engineering, University of Engineering & Technology (UET), Peshawar, Pakistan, 2009. ResearchRenewable energy, structural dynamics, vibration, finite element modelling, and roll-to-roll manufacturing. CV Dr. SAJID ALI CV
